Subscribe now to watch the full video.

Impact Fix - Driver

While this may seem like a simple drill, training "impact fix" for the driver is a great way to reinforce proper orientations and build spatial awareness. The reasons for doing this drill with several different clubs can be summarized by this anecdote:

Jon Rahm, former World No. 1, has an attack angle with his 9-iron that is 9 degrees "down"; his driver attack angle is 5 degrees "up". This means he can vary his attack angle by up to 14 degrees between just (2) different shots.

Ultimately, this variation in attack angle is necessary for producing optimal launch conditions with every club in the bag. However, if we do not understand the changes in body movements & release patterns that create this dynamic ability, we are going to have a hard time playing consistently with the irons & driver.

Tags: Driver, Impact, Concept, Beginner

00:00:00,000 --> 00:00:07,000
This is the driver impact fix.

00:00:07,000 --> 00:00:12,000
The driver impact fix is looking at the difference between the setup and impact.

00:00:12,000 --> 00:00:17,000
Similar to the iron version, where if I choke up like it was an iron, with the iron version

00:00:17,000 --> 00:00:24,000
if we do the merry-go-round, our hands get a few inches or four inches or closer to the target,

00:00:24,000 --> 00:00:29,000
they get a little bit higher, face gets a little bit more close, and we feel this kind of

00:00:29,000 --> 00:00:32,000
shaft lean that helps give us really solid contact.

00:00:32,000 --> 00:00:37,000
Well, with the driver, one of the interesting things is when we do this impact fix,

00:00:37,000 --> 00:00:43,000
you'll notice that at start position it's on the ground, and then if I go to impact

00:00:43,000 --> 00:00:47,000
position, it's actually going to be off the ground.

00:00:47,000 --> 00:00:51,000
So it goes from here, more to there.

00:00:51,000 --> 00:00:55,000
And what you'll see is the hands don't move as much, the shaft will move around a little bit,

00:00:55,000 --> 00:01:01,000
but the hands don't move as much with the driver as they will with the iron.

00:01:01,000 --> 00:01:07,000
So it's also answers a member question that's basically, okay, if we set up with the driver

00:01:07,000 --> 00:01:12,000
on the ground and we tee the ball halfway up the face, what is it that actually adjust

00:01:12,000 --> 00:01:16,000
the driver so that you then hit it just above center?

00:01:16,000 --> 00:01:21,000
Because with the iron, we're trying to make contact about the fourth group up with the driver,

00:01:21,000 --> 00:01:26,000
you're trying to make contact, just above center and just slightly, you know, millimeter

00:01:26,000 --> 00:01:28,000
towards the heel.

00:01:28,000 --> 00:01:32,000
So just above center, just towards the heel, but pretty much in the middle of the club,

00:01:32,000 --> 00:01:33,000
just like that.

00:01:33,000 --> 00:01:38,000
Okay, well, when I start with it on the ground, I'm going to have certain amount of

00:01:38,000 --> 00:01:39,000
bending my arms.

00:01:39,000 --> 00:01:46,000
Well when I get to impact that right arm is typically going to be bent about 45 degrees

00:01:46,000 --> 00:01:50,000
or so, 40 degrees somewhere in that zone.

00:01:50,000 --> 00:01:54,000
So if here, let's say it's 20 degrees bent at setup, well that means I'm going to bend

00:01:54,000 --> 00:01:56,000
it 20 degrees more.

00:01:56,000 --> 00:01:59,000
That puts the driver back behind me a little bit like this.

00:01:59,000 --> 00:02:06,000
And then when I change my body position, when I go from here back to impact, my upper body

00:02:06,000 --> 00:02:13,000
is actually going to be one to two inches behind where it started.

00:02:13,000 --> 00:02:18,000
So that combination of, I'm set up here and then at impact, I'm a little bit further back

00:02:18,000 --> 00:02:21,000
and the right arm is a little bit more bent.

00:02:21,000 --> 00:02:24,000
That brings the driver up off the ground.

00:02:24,000 --> 00:02:30,000
And that gives me basically the position so that then when I extend my arms through, you'll

00:02:30,000 --> 00:02:35,000
see that it has a nice flat bottom of the swing, club faces already, very square, feels

00:02:35,000 --> 00:02:40,000
very stable, pointing at the target, but the arm extension is through the ball instead of

00:02:40,000 --> 00:02:41,000
at it.

00:02:41,000 --> 00:02:48,000
But the two big differences are with the iron, we get an inch or so closer to the golf ball,

00:02:48,000 --> 00:02:54,000
as we rotate through and our hands get four inches or so in front of the golf ball

00:02:54,000 --> 00:02:57,000
at impact, that helps create the shaft lean.

00:02:57,000 --> 00:03:03,000
Well, hands are in a similar position compared to the body, but the body is further back

00:03:03,000 --> 00:03:07,000
in a little bit more rotated inside bent, that helps keep this right arm bent longer.

00:03:07,000 --> 00:03:12,000
And those two combinations being a little bit further back and the arm more bent elevate

00:03:12,000 --> 00:03:13,000
the driver off the ground.