Subscribe now to watch the full video.

Path Check Points - Balance Your Swing Path

It is impossible to tell the exact path of the club without some sophisticated launch monitor technology, but you can get a fairly reasonable approximation by looking at ball flight. Sometimes, it's hard to believe (or feel) the swing that you are actually making so it's good to use objective feedback. The gate drills can be very useful for that, but you can also use a less obtrusive method if you set up a station like the one demonstrated in this video. You are going to check the path of the club at shaft parallel to the ground in both the downswing and the follow through. This is the time when your club should pretty much follow a plane, so you can get an idea as to how far in to out or out to in the club path is swinging by comparing the club head to the hands (or alignment sticks) at these two check points.

Tags: Not Straight Enough, Not Enough Distance, Intermediate, Beginner

00:00:00,000 --> 00:00:07,000
This video is path checkpoints. So I'm going to show you a way you can use video and the

00:00:07,000 --> 00:00:10,000
position when the club is shaft parallel to the ground either on the downswing or in the

00:00:10,000 --> 00:00:15,000
follow through to help you figure out just the general tendencies of what your path

00:00:15,000 --> 00:00:20,000
would be. So from the face on camera view we're talking about roughly there where the shaft

00:00:20,000 --> 00:00:24,000
is parallel to the ground and roughly there when the shaft is almost parallel to the

00:00:24,000 --> 00:00:29,000
ground. So what I've done is I've put an alignment rod on the ground that I'm going to try

00:00:29,000 --> 00:00:34,000
to set up with my hands above and then I've got an alignment stick in a range basket.

00:00:34,000 --> 00:00:38,000
If you're out on the driving range of course you can stick them in the ground but I've

00:00:38,000 --> 00:00:41,000
got it far enough away that I'm not going to hit it. So I've got an alignment stick there

00:00:41,000 --> 00:00:49,000
and I've got an alignment stick here. So now if I was to set up to a golf ball with my hands

00:00:49,000 --> 00:00:56,000
more or less on top of this stick right here then this is going to be as long as I'm

00:00:56,000 --> 00:01:01,000
my camera pointed roughly through my hands. This is going to be a pretty good assessment

00:01:01,000 --> 00:01:08,000
for where the clubhead is compared to my hands at this waist height position. So in general

00:01:08,000 --> 00:01:12,000
this is not completely absolute and we'll talk about a couple exceptions but in general

00:01:12,000 --> 00:01:18,000
the more that my hands are inside of this line or the the clubhead is inside of this line

00:01:18,000 --> 00:01:24,000
when my hands are parallel the more that I'm going to be a right word path or draw or hook

00:01:24,000 --> 00:01:31,000
biased or potentially block if I don't square the face and the more on the follow-through

00:01:31,000 --> 00:01:39,000
side that the club is on the right side or outside or above the impact plane I'm also going

00:01:39,000 --> 00:01:48,000
to be right word path dominant or hook or block biased. The opposite would be more of a

00:01:48,000 --> 00:01:54,000
fade bias. So if I was to take this checkpoint right here I'm pretty much in line with the

00:01:54,000 --> 00:02:01,000
club. If I was to be out like so this would be more or less a left word path bias which would

00:02:01,000 --> 00:02:09,000
be more of slices, fades and poles. On the follow-through side if it's blocked by my body or it's

00:02:09,000 --> 00:02:15,000
left of where this would be in line that's also going to be a left word path bias with which

00:02:16,000 --> 00:02:25,000
typically will result in poles, slices and fades. If it's pretty much straight here in straight

00:02:25,000 --> 00:02:31,000
here I'm going to have very little curve depending on follow-through contact and little things

00:02:31,000 --> 00:02:37,000
with my release I'll have slight amount of curve but if I'm trying to hit a big hook typically

00:02:37,000 --> 00:02:42,000
going to try to get my the club well inside here to potentially well above and outside there

00:02:42,000 --> 00:02:49,000
if I'm trying to hit a big slice typically going to get the club well outside here and well

00:02:49,000 --> 00:02:58,000
inside there. Now some good players will tend to do one of each. They will tend to get slightly on the

00:02:58,000 --> 00:03:02,000
inside here and then because of their body pivot and the way that their upper body rotates through

00:03:02,000 --> 00:03:10,000
their shot they'll tend to get slightly inside there. I think it's virtually impossible

00:03:11,000 --> 00:03:15,000
in any type of full swing possibly in a wedge shot when any type of full swing to be

00:03:15,000 --> 00:03:22,000
outside here and then outside there. So that covers the different possibilities and if you're working

00:03:22,000 --> 00:03:27,000
on your shot shaping so if you slice the ball and you're trying to hit a draw or if you hook the

00:03:27,000 --> 00:03:32,000
ball and you're trying to hit a little bit of a fade these can be really good checkpoints when

00:03:32,000 --> 00:03:38,000
you are checking your own video or just to help you with the spatial relationship so when I said

00:03:38,000 --> 00:03:44,000
it's the golf ball I now have a visual like even if I feel like I'm coming inside but if I get here

00:03:44,000 --> 00:03:49,000
I know that I'm not so it gives you a good little spatial relationship and then you can

00:03:50,000 --> 00:03:54,000
hit full shots as long as you put these far enough away that you're in safety.

00:03:54,000 --> 00:03:59,000
Potentially you don't even need that one on the follow-through side but this can be very helpful

00:03:59,000 --> 00:04:05,000
for when you're working on your shot shaping.